We get a fair amount of questions about using hydraulic attachments like mulchers and brush cutters on SANY excavators. One of the most important factors to consider is continuous flow. Whether you’re clearing land or tackling tough brush, you need to double-check that your machine’s hydraulic flow matches the attachment’s requirements. It’s all about getting the job done efficiently and safely.

Why Continuous Flow Matters

Continuous flow is what keeps your hydraulic attachment running smoothly without interruptions. But here’s the thing: not all attachments are created equal, and neither are the machines they’re paired with. If your excavator’s flow is too high, you risk blowing out hoses and seals, leading to costly downtime and repairs. On the flip side, if the flow is too low, your attachment won’t perform at its best, leaving you with a tool that’s more frustrating than functional.

This is why it’s crucial to match your machine’s hydraulic flow ratings with the needs of your attachment. By doing so, your excavator can handle the job at hand—whether you’re mulching, cutting, or performing any other demanding task—without unnecessary wear and tear.

How to Set Up Continuous Flow

Getting your SANY excavator ready for continuous flow is straightforward, and we’re here to walk you through it:

1. Access the Main Menu: Start by pressing the fourth button on your excavator’s monitor. This will take you to the main menu where you can adjust your machine’s settings.
2. Activate Continuous Flow: Press the second button on the menu to activate the continuous flow feature. You’ll know it’s on when the button turns blue.
3. Engage the Attachment: On your right joystick, hold the attachment controller to the right for about 3 to 5 seconds. You’ll hear the engine rev up, signaling that the continuous flow is now active and your attachment is ready to go.
4. Deactivating Continuous Flow: When you’re done with the job, simply click the button once to turn off continuous flow. The attachment will take a few seconds to wind down, and then you’re all set.

It’s really that simple! But remember, if your machine’s buttons are in different positions, just follow the same icons, and you’ll get to the right place. And if you’re ever in doubt, don’t hesitate to reach out—we’re here to help!

Ensuring Your Machine Grows with Your Needs

As you continue to take on bigger and more demanding jobs, your hydraulic power needs might also grow. That’s why your machine needs to handle those demands. Regularly check your hydraulic flow ratings, and if you’re considering adding a new attachment to your fleet, make sure it’s compatible with your current setup. The last thing you want is to invest in a tool that your machine can’t fully utilize.

If you have any questions about hydraulic attachments or need advice on setting up continuous flow, give us a call at 859-888-1388. We’re always ready to help you get the most out of your SANY excavator!

See More Equipment Tutorials